Streamline™ Software License

$2,990.00 USD

Software license for Streamline™

Includes initial installation on one (1) computer and 1 year of support and use of the program.

  • An annual software license renewal fee of  $395.00 is required for continued use after the first year.

Streamline™ is the breakthrough ball mill modeling application that uses Functional Performance Analysis to carry out circuit performance improvements.

The application uses plant survey data to construct a ball mill size reduction model represented by real-world cumulative grinding rates through all size classes. Cyclone separation performance is characterized using size-by-size recoveries to underflow. This easy-to-construct, two-unit circuit model perfectly replicates the circuit survey size distributions and mass flows.

Pump and cyclone performances can then be adjusted using the provided step-by-step procedure to maximize Classification System Efficiency (CSE), the optimization metric.

Streamline™ is easy to understand and use, it is fully supported by tutorial videos, live technical support, and related training modules from the Metcom Grinding Process Management System.

Streamline™ is unlike any other circuit modeling system. Essentially, it is a “CSE optimization tool”. Projected CSE gains are modeled using various trial scenarios and applied as reduced ball mill power, increased circuit throughput, or finer product size.  A foundational understanding of Functional Performance, Classification System Efficiency, and the methodologies to manipulate pump and hydro cyclone performance is needed to make effective use of Streamline.

These skills and knowledge are provided in Metcom’s Classification System Efficiency (CSE) Training Program

It is strongly recommended that you have completed this program prior to using Streamline. The program includes the following training modules:

  • Module 5 – Functional Performance of Ball Milling
  • Module 7 – Hydrocyclone Performance
  • Module 8 – Hydrocyclone Adjustments
  • Module 9 – Slurry Pumping
  • Module 18 – Evaluation of Circuit Classification

The estimated completion time for the entire program is approximately 16 hours.

Streamline™ is a Microsoft Windows computer application and requires that the user has Microsoft Excel installed.

System Requirements:

  • Windows 10 or higher
  • Excel 2010 or higher
  • Admin privileges may be required for program  installation

End-User License Agreement ( EULA)

This End-User License Agreement (“EULA”) is a legal agreement between you and Metcom Technologies, Inc.

This EULA agreement governs your acquisition and use of our Streamline software (“Software”) directly from Metcom Technologies, Inc. or indirectly through a Metcom Technologies, Inc. authorized reseller or distributor (a “Reseller”).

Please read this EULA agreement carefully before completing the installation process and using the Streamline software. It provides a license to use the Streamline software and contains warranty information and liability disclaimers.

If you register for a free trial of the Streamline software, this EULA agreement will also govern that trial. By clicking “accept” or installing and/or using the Streamline software, you are confirming your acceptance of the Software and agreeing to become bound by the terms of this EULA agreement.

If you are entering into this EULA agreement on behalf of a company or other legal entity, you represent that you have the authority to bind such entity and its affiliates to these terms and conditions. If you do not have such authority or if you do not agree with the terms and conditions of this EULA agreement, do not install or use the Software, and you must not accept this EULA agreement.

This EULA agreement shall apply only to the Software supplied by Metcom Technologies, Inc. herewith regardless of whether other software is referred to or described herein. The terms also apply to any Metcom Technologies, Inc. updates, supplements, Internet-based services, and support services for the Software, unless other terms accompany those items on delivery. If so, those terms apply.

License Grant
Metcom Technologies, Inc. hereby grants you a personal, non-transferable, non-exclusive license to use the Streamline software on your devices in accordance with the terms of this EULA agreement.

You are permitted to load the Streamline software on a single PC or laptop under your control.

This License is valid for one year starting from the time that the license key unlocking Streamline is provided to the end-user.

Installation and setup require you to provide Metcom with a “Computer ID” which is unique to the device in which Streamline is installed. In the event, the end-user changes their device and wishes to install Streamline on a new device, the Streamline installation on the previous device must be uninstalled. A new licience-key,  unlocking Streamline for the new device will be provided upon confirmation that the previous installation has been deleted.

All Streamline™ end-users must complete and return Metcom Participant Agreement acknowledging that they understand the copyright protection of Metcom intellectual property.

You are responsible for ensuring your device meets the minimum requirements of the Streamline™ software.

You are not permitted to:

  • Edit, alter, modify, adapt, translate or otherwise change the whole or any part of the Software nor permit the whole or any part of the Software to be combined with or become incorporated in any other software, nor decompile, disassemble or reverse engineer the Software or attempt to do any such things.
  • Reproduce, copy, distribute, resell or otherwise use the Software for any commercial purpose
  • Allow any third party to use the Software on behalf of or for the benefit of any third party
  • Use the Software in any way which breaches any applicable local, national or international law
  • Use the Software for any purpose that Metcom Technologies, Inc. considers is a breach of this EULA agreement

Intellectual Property and Ownership
Metcom Technologies, Inc. shall at all times retain ownership of the Software as originally downloaded by you and all subsequent downloads of the Software by you. The Software (and the copyright, and other intellectual property rights of whatever nature in the Software, including any modifications made thereto) are and shall remain the property of Metcom Technologies, Inc.

Metcom Technologies, Inc. reserves the right to grant licenses to use the Software to third parties.

This EULA agreement is effective from the date you first use the Software and shall continue until terminated. You may terminate it at any time upon written notice to Metcom Technologies, Inc.

It will also terminate immediately if you fail to comply with any term of this EULA agreement. Upon such termination, the licenses granted by this EULA agreement will immediately terminate and you agree to stop all access and use of the Software. The provisions that by their nature continue and survive will survive any termination of this EULA agreement.

Governing Law
This EULA agreement, and any dispute arising out of or in connection with this EULA agreement, shall be governed by and construed in accordance with the laws of the United States.